diff --git a/src/arm/am335x-sancloud-bbe-common.dtsi b/src/arm/am335x-sancloud-bbe-common.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..cfcb365a397462d665e852aa26ba1e1de3388819
--- /dev/null
+++ b/src/arm/am335x-sancloud-bbe-common.dtsi
@@ -0,0 +1,585 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led2 {
+ label = "beaglebone:green:usr0";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "beaglebone:green:usr1";
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "beaglebone:green:usr2";
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led5 {
+ label = "beaglebone:green:usr3";
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+ };
+
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_hub_ctrl>;
+
+ user_leds_s0: user_leds_s0 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+// i2c2_pins: pinmux_i2c2_pins {
+// pinctrl-single,pins = <
+// AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+// AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+// >;
+// };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ >;
+ };
+
+ emmc_pins: pinmux_emmc_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+
+ usb_hub_ctrl: usb_hub_ctrl {
+ pinctrl-single,pins = <
+ 0x144 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
+ >;
+ };
+
+ mpu6050_pins: pinmux_mpu6050_pins {
+ pinctrl-single,pins = <
+ 0x168 (PIN_INPUT | MUX_MODE7) /* spi0_sclk.gpio0_2 */
+ >;
+ };
+
+ lps3331ap_pins: pinmux_lps3331ap_pins {
+ pinctrl-single,pins = <
+ 0x6C (PIN_INPUT | MUX_MODE7) /* conf_gpmc_a11.gpio1_27 */
+ >;
+ };
+
+ /* P9_19 (ZCZ ball D17) i2c2_scl */
+ P9_19_default_pin: pinmux_P9_19_default_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */
+ P9_19_gpio_pin: pinmux_P9_19_gpio_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */
+ P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */
+ P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */
+ P9_19_gpio_input_pin: pinmux_P9_19_gpio_input_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_INPUT | MUX_MODE7) >; }; /* uart1_rtsn.gpio0_13 */
+ P9_19_timer_pin: pinmux_P9_19_timer_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_rtsn.timer5 */
+ P9_19_can_pin: pinmux_P9_19_can_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart1_rtsn.dcan0_rx */
+ P9_19_i2c_pin: pinmux_P9_19_i2c_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_rtsn.i2c2_scl */
+ P9_19_spi_cs_pin: pinmux_P9_19_spi_cs_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_rtsn.spi1_cs1 */
+ P9_19_pru_uart_pin: pinmux_P9_19_pru_uart_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x097c, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_rtsn.pr1_uart0_rts_n */
+
+ /* P9_20 (ZCZ ball D18) i2c2_sda */
+ P9_20_default_pin: pinmux_P9_20_default_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */
+ P9_20_gpio_pin: pinmux_P9_20_gpio_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_OUTPUT | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */
+ P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */
+ P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLDOWN | INPUT_EN | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */
+ P9_20_gpio_input_pin: pinmux_P9_20_gpio_input_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_INPUT | MUX_MODE7) >; }; /* uart1_ctsn.gpio0_12 */
+ P9_20_timer_pin: pinmux_P9_20_timer_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE1) >; }; /* uart1_ctsn.timer6 */
+ P9_20_can_pin: pinmux_P9_20_can_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | MUX_MODE2) >; }; /* uart1_ctsn.dcan0_tx */
+ P9_20_i2c_pin: pinmux_P9_20_i2c_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE3) >; }; /* uart1_ctsn.i2c2_sda */
+ P9_20_spi_cs_pin: pinmux_P9_20_spi_cs_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE4) >; }; /* uart1_ctsn.spi1_cs0 */
+ P9_20_pru_uart_pin: pinmux_P9_20_pru_uart_pin { pinctrl-single,pins = <
+ AM33XX_IOPAD(0x0978, PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE5) >; }; /* uart1_ctsn.pr1_uart0_cts_n */
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "peripheral";
+ interrupts-extended = <&intc 18 &tps 0>;
+ interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ baseboard_eeprom: baseboard_eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ baseboard_data: baseboard_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ lps331ap: lps331ap@5C {
+ compatible = "st,lps331ap";
+ reg = <0x5C>;
+ interrupts = <0>, <1>;
+ };
+
+ mpu6050: mpu6050@68 {
+ compatible = "inv,mpu6050";
+ reg = <0x68>;
+ orientation = <0xff 0 0 0 1 0 0 0 0xff>;
+ interrupts = <2 1>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ //pinctrl-0 = <&i2c2_pins>;
+ pinctrl-0 = <>;
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ cape_eeprom0: cape_eeprom0@54 {
+ compatible = "atmel,24c256";
+ reg = <0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape0_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom1: cape_eeprom1@55 {
+ compatible = "atmel,24c256";
+ reg = <0x55>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape1_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom2: cape_eeprom2@56 {
+ compatible = "atmel,24c256";
+ reg = <0x56>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape2_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom3: cape_eeprom3@57 {
+ compatible = "atmel,24c256";
+ reg = <0x57>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape3_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+};
+
+
+/include/ "tps65217.dtsi"
+
+&tps {
+ /*
+ * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+ * mode") at poweroff. Most BeagleBone versions do not support RTC-only
+ * mode and risk hardware damage if this mode is entered.
+ *
+ * For details, see linux-omap mailing list May 2015 thread
+ * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+ * In particular, messages:
+ * http://www.spinics.net/lists/linux-omap/msg118585.html
+ * http://www.spinics.net/lists/linux-omap/msg118615.html
+ *
+ * You can override this later with
+ * &tps { /delete-property/ ti,pmic-shutdown-controller; }
+ * if you want to use RTC-only mode and made sure you are not affected
+ * by the hardware problems. (Tip: double-check by performing a current
+ * measurement after shutdown: it should be less than 1 mA.)
+ */
+
+ interrupts = <7>; /* NMI */
+ interrupt-parent = <&intc>;
+
+ ti,pmic-shutdown-controller;
+
+ charger {
+ status = "okay";
+ };
+
+ pwrbutton {
+ status = "okay";
+ };
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1351500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3a";
+ regulator-always-on;
+ };
+ };
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii-txid";
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ slaves = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+&mmc1 {
+ status = "okay";
+ bus-width = <0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&aes {
+ status = "okay";
+};
+
+&sham {
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
+ clock-names = "ext-clk", "int-clk";
+ system-power-controller;
+};
+
+&wkup_m3_ipc {
+ ti,scale-data-fw = "am335x-bone-scale-data.bin";
+};
+
+//&pruss_soc_bus {
+// status = "okay";
+//
+// pruss: pruss@0 {
+// status = "okay";
+// };
+//};
+
+/* the cape manager */
+/ {
+ bone_capemgr {
+ compatible = "ti,bone-capemgr";
+ status = "okay";
+
+ nvmem-cells = <&baseboard_data &cape0_data &cape1_data &cape2_data &cape3_data>;
+ nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3";
+ #slots = <4>;
+
+ /* map board revisions to compatible definitions */
+ baseboardmaps {
+ baseboard_beaglebone: board@0 {
+ board-name = "A335BONE";
+ compatible-name = "ti,beaglebone";
+ };
+
+ baseboard_beaglebone_black: board@1 {
+ board-name = "A335BNLT";
+ compatible-name = "ti,beaglebone-black";
+ };
+ };
+ };
+};
+
+&ocp {
+ /* P9_19 (ZCZ ball D17) i2c */
+ P9_19_pinmux {
+ compatible = "bone-pinmux-helper";
+ status = "okay";
+ pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer";
+ pinctrl-0 = <&P9_19_default_pin>;
+ pinctrl-1 = <&P9_19_gpio_pin>;
+ pinctrl-2 = <&P9_19_gpio_pu_pin>;
+ pinctrl-3 = <&P9_19_gpio_pd_pin>;
+ pinctrl-4 = <&P9_19_gpio_input_pin>;
+ pinctrl-5 = <&P9_19_spi_cs_pin>;
+ pinctrl-6 = <&P9_19_can_pin>;
+ pinctrl-7 = <&P9_19_i2c_pin>;
+ pinctrl-8 = <&P9_19_pru_uart_pin>;
+ pinctrl-9 = <&P9_19_timer_pin>;
+ };
+
+ /* P9_20 (ZCZ ball D18) i2c */
+ P9_20_pinmux {
+ compatible = "bone-pinmux-helper";
+ status = "okay";
+ pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "gpio_input", "spi_cs", "can", "i2c", "pru_uart", "timer";
+ pinctrl-0 = <&P9_20_default_pin>;
+ pinctrl-1 = <&P9_20_gpio_pin>;
+ pinctrl-2 = <&P9_20_gpio_pu_pin>;
+ pinctrl-3 = <&P9_20_gpio_pd_pin>;
+ pinctrl-4 = <&P9_20_gpio_input_pin>;
+ pinctrl-5 = <&P9_20_spi_cs_pin>;
+ pinctrl-6 = <&P9_20_can_pin>;
+ pinctrl-7 = <&P9_20_i2c_pin>;
+ pinctrl-8 = <&P9_20_pru_uart_pin>;
+ pinctrl-9 = <&P9_20_timer_pin>;
+ };
+
+
+ cape-universal {
+ compatible = "gpio-of-helper";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <>;
+
+ P9_19 {
+ gpio-name = "P9_19";
+ gpio = <&gpio0 13 0>;
+ input;
+ dir-changeable;
+ };
+
+ P9_20 {
+ gpio-name = "P9_20";
+ gpio = <&gpio0 12 0>;
+ input;
+ dir-changeable;
+ };
+
+ };
+};
diff --git a/src/arm/am335x-sancloud-bbe-uboot-univ.dts b/src/arm/am335x-sancloud-bbe-uboot-univ.dts
new file mode 100644
index 0000000000000000000000000000000000000000..f99e22f326436a7a6bd25ac20331c2851f8bf243
--- /dev/null
+++ b/src/arm/am335x-sancloud-bbe-uboot-univ.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+#include "am335x-bone-common-univ.dtsi"
+
+/ {
+ model = "SanCloud BeagleBone Enhanced";
+ compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+};
diff --git a/src/arm/am335x-sancloud-bbe-uboot.dts b/src/arm/am335x-sancloud-bbe-uboot.dts
new file mode 100644
index 0000000000000000000000000000000000000000..d4c592d7629da0b2dbc774a162d28ab2c0107fdd
--- /dev/null
+++ b/src/arm/am335x-sancloud-bbe-uboot.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+
+/ {
+ model = "SanCloud BeagleBone Enhanced";
+ compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+};