feat: getting started with enable uart transmitter

src/uart-transmit/esp32-c3-uart-interface.c

 #include "esp32-c3-uart-interface.h"
 
+static void clearBits(volatile uint32_t *registerAddress, uint32_t bitPositions, uint32_t numBits) {
+    uint32_t mask = (uint32_t)(1 << numBits) - 1;  // Create a mask with the specified number of bits set to 1
+    mask <<= bitPositions;               // Shift the mask to the correct bit positions
+    *registerAddress &= ~mask;           // Clear the bits in the register using bitwise AND with the inverse of the mask
+}
+
 static void init_uart_enable_clk(){
   // enable the clock for UART RAM by setting SYSTEM_UART_MEM_CLK_EN to 1;
   // enable APB_CLK for UARTn by setting SYSTEM_UARTn_CLK_EN to 1;
-  uint32_t perip_clk_en0_reg = *C3_SYSTEM_PERIP_CLK_EN0_REG;
-  perip_clk_en0_reg |= 1<<24;
-  perip_clk_en0_reg |= 1<<5;
-  perip_clk_en0_reg |= 1<<2;
-  *C3_SYSTEM_PERIP_CLK_EN0_REG = perip_clk_en0_reg;
+  uint32_t perip_clk_en0 = *C3_SYSTEM_PERIP_CLK_EN0_REG;
+  perip_clk_en0 |= 1<<24;
+  perip_clk_en0 |= 1<<5;
+  perip_clk_en0 |= 1<<2;
+  *C3_SYSTEM_PERIP_CLK_EN0_REG = perip_clk_en0;
 }
 
 static void init_uart_toggle_rst(){
   // Detailed steps explained in 26.5.2.1
   // for resetting and initilizing of uart
   // get current regestry values
-  uint32_t rx_filt_reg = *C3_UART_RX_FILT_REG;
-  uint32_t core_value = *C3_UART_CLK_CONF_REG;
+  uint32_t rx_filt = *C3_UART_RX_FILT_REG_UART0;
+  uint32_t core_value = *C3_UART_CLK_CONF_REG_UART0;
   // clear UARTn_RST
-  rx_filt_reg &= (uint32_t)~(1<<5);
-  rx_filt_reg &= (uint32_t)~(1<<2);
-  *C3_UART_RX_FILT_REG = rx_filt_reg;
+  rx_filt &= (uint32_t)~(1<<5);
+  rx_filt &= (uint32_t)~(1<<2);
+  *C3_UART_RX_FILT_REG_UART0 = rx_filt;
   // set UART_RST_CORE
   core_value |= 1<<23;
-  *C3_UART_CLK_CONF_REG = core_value;
+  *C3_UART_CLK_CONF_REG_UART0 = core_value;
   // set UARTn_RST
-  rx_filt_reg |= 1<<5;
-  rx_filt_reg |= 1<<2;
-  *C3_UART_RX_FILT_REG = rx_filt_reg;
+  rx_filt |= 1<<5;
+  rx_filt |= 1<<2;
+  *C3_UART_RX_FILT_REG_UART0 = rx_filt;
   // clear UARTn_RST
-  rx_filt_reg &= (uint32_t)~(1<<5);
-  rx_filt_reg &= (uint32_t)~(1<<2);
-  *C3_UART_RX_FILT_REG = rx_filt_reg;
+  rx_filt &= (uint32_t)~(1<<5);
+  rx_filt &= (uint32_t)~(1<<2);
+  *C3_UART_RX_FILT_REG_UART0 = rx_filt;
   // clear UART_RST_CORE
   core_value &= (uint32_t)~(1<<23);
-  *C3_UART_CLK_CONF_REG = core_value;
+  *C3_UART_CLK_CONF_REG_UART0 = core_value;
 }
 
 static void init_uart_clear_update(){  
   // enable register synchronization by clearing UART_UPDATE_CTRL.
-  uint32_t id_value = *C3_UART_ID_REG;
+  uint32_t id_value = *C3_UART_ID_REG_UART0;
   id_value &= (uint32_t)~(1<<30);
-  *C3_UART_ID_REG = id_value;
+  *C3_UART_ID_REG_UART0 = id_value;
 }
 
 static void config_clock_freq(){
@@ -48,7 +54,7 @@ static void config_clock_freq(){
   // baud rate = freq / (UART_CLKDIV + UART_CLKDIV_FRAG / 16)
 
   // select the clock source via UART_SCLK_SEL;
-  uint32_t clockSelect = *C3_UART_CLK_CONF_REG;
+  uint32_t clockSelect = *C3_UART_CLK_CONF_REG_UART0;
   // making sure we start with 0
   clockSelect &= (uint32_t)~(1<<20);
   clockSelect &= (uint32_t)~(1<<21);
@@ -56,7 +62,7 @@ static void config_clock_freq(){
   // 10 is RC_FAST_CLK with default of 17.5 MHz
   // 11 is XTAL_CLK with 40 MHz
   clockSelect |= 1<<20;
-  *C3_UART_CLK_CONF_REG = clockSelect;
+  *C3_UART_CLK_CONF_REG_UART0 = clockSelect;
   // selected ABP_CLK with 80 MHz
 
   // dividing clock to 6 Mhz (divisor should be 13+1/3)
@@ -72,36 +78,36 @@ static void config_clock_freq(){
   clockSelect |= 1<<1;
   clockSelect |= 1<<0;
 
-  *C3_UART_CLK_CONF_REG = clockSelect;
+  *C3_UART_CLK_CONF_REG_UART0 = clockSelect;
 
   // calculate Baud rate to be 9600 (6Mhz/625)
-  uint32_t baudRateDivs = *C3_UART_CLKDIV_REG;
+  uint32_t baudRateDivs = *C3_UART_CLKDIV_REG_UART0;
   baudRateDivs |= 1<<0;
   baudRateDivs |= 1<<4;
   baudRateDivs |= 1<<5;
   baudRateDivs |= 1<<6;
   baudRateDivs |= 1<<9;
-  *C3_UART_CLKDIV_REG = baudRateDivs;
+  *C3_UART_CLKDIV_REG_UART0 = baudRateDivs;
 }
 
 static void disable_parity(){
-  uint32_t uart_conf_reg = *C3_UART_CONF0_REG;
-  uart_conf_reg &= (uint32_t)~(1<<0);
-  uart_conf_reg &= (uint32_t)~(1<<1);
-  *C3_UART_CONF0_REG = uart_conf_reg;
+  uint32_t uart_conf = *C3_UART_CONF0_REG_UART0;
+  uart_conf &= (uint32_t)~(1<<0);
+  uart_conf &= (uint32_t)~(1<<1);
+  *C3_UART_CONF0_REG_UART0 = uart_conf;
 }
 
 static void set_max_data_lenght(){
-  uint32_t uart_conf_reg = *C3_UART_CONF0_REG;
-  uart_conf_reg |= (1<<2);
-  uart_conf_reg |= (1<<3);
-  *C3_UART_CONF0_REG = uart_conf_reg;
+  uint32_t uart_conf = *C3_UART_CONF0_REG_UART0;
+  uart_conf |= (1<<2);
+  uart_conf |= (1<<3);
+  *C3_UART_CONF0_REG_UART0 = uart_conf;
 }
 
 void config_uart(){
   printf("Try to config %d\n", 1);
-  // wait for UART_REG_UPDATE to become 0, which indicates the completion of the last synchronization;
-  uint32_t reg_update = *C3_UART_ID_REG;
+  // wait for UART_REG_UART0_UPDATE to become 0, which indicates the completion of the last synchronization;
+  uint32_t reg_update = *C3_UART_ID_REG_UART0;
   if ((bool)(reg_update & (uint32_t)(1<<31))){
     return;
   }
@@ -122,13 +128,28 @@ void config_uart(){
   
   // synchronize the configured values to the Core Clock domain by writing 1 to UART_REG_UPDATE.
   reg_update |= (uint32_t)(1<<31);
-  *C3_UART_ID_REG = reg_update;
+  *C3_UART_ID_REG_UART0 = reg_update;
+}
+
+static void set_65_to_rd_byte(){
+  uint32_t rx_fifo = *C3_UART_FIFO_REG_UART0;
+  // making sure we start with 0
+  rx_fifo |= 1<<0;
+  rx_fifo |= 1<<6;
+  *C3_UART_FIFO_REG_UART0 = rx_fifo;
+
 }
 
 void enable_uart_transmitter(){
   // configure TX FIFO’s empty threshold via UART_TXFIFO_EMPTY_THRHD;
+  clearBits(C3_UART_CONF1_REG_UART0, 9, 9);
+
   // disable UART_TXFIFO_EMPTY_INT interrupt by clearing UART_TXFIFO_EMPTY_INT_ENA;
+  clearBits(C3_UART_INT_ENA_REG_UART0, 1, 1);
+
   // write data to be sent to UART_RXFIFO_RD_BYTE;
+  set_65_to_rd_byte();
+  
   // clear UART_TXFIFO_EMPTY_INT interrupt by setting UART_TXFIFO_EMPTY_INT_CLR;
   // enable UART_TXFIFO_EMPTY_INT interrupt by setting UART_TXFIFO_EMPTY_INT_ENA;
   // detect UART_TXFIFO_EMPTY_INT and wait for the completion of data transmission.